Everything Hunting

Mosin Nagant

Headspace Gage 7.62×54 Russian Field $26.95 The Field gauge is used to measure the absolute maximum allowable, safe chamber headspace. If the bolt closes on the Field Gauge it is considered unsafe and should be taken out of service for repair. This gauge ships only in the USA, No export or APO….

Gun_M1891_B MOSIN NAGANT 1:6 Action Figure M1891 SNIPER RIFLE Enemy at the Gates Model For 1:6 Scale 12 Action Figure Accessories $13.49 100% BRAND NEW. 1:6 precision Scale For 12 inch Action Figures. Fit all any 12″ action figure – Dragon, BBI, Hot toys. Material is plastic, not real gun, cannot shoot. With extreme details. Very well paints including aging technique, so that they look very real, not like other models and you can fit immediately with your 1/6 12″ soldier models. This is a very rare model and is specially developed….

Gun_M1891_A MOSIN NAGANT 1:6 Action Figure M1891 SNIPER RIFLE Enemy at the Gates Model For 1:6 Scale 12 Action Figure Accessories $13.49 100% BRAND NEW. 1:6 precision Scale For 12 inch Action Figures. Fit all any 12″ action figure – Dragon, BBI, Hot toys. Material is plastic, not real gun, cannot shoot. With extreme details. Very well paints including aging technique, so that they look very real, not like other models and you can fit immediately with your 1/6 12″ soldier models. This is a very rare model and is specially developed….

Axis and Allies Miniatures: Mosin-Nagant 1891-30 # 21 – 1939 – 1945 $4.79 Axis and Allies Miniatures: Mosin-Nagant 1891-30 # 21 – 1939 – 1945. Axis & Allies is the iconic World War II strategy board game where the five major powers (Japan, Germany, United Kingdom, United States, & USSR) struggle for supremacy. Players deploy and command land, sea, and air forces in order to conquer and control important victory cities. Each commander must carefully manage their nations?…

Disassembly/Reassembly of the Mosin-Nagant Rifle $19.97 …

1 Ring-3/8 Dovetail-High $8.99 (2) 1 inch Dovetail rings. Aluminum construction. Weight: 1.8 ounces Overall Height: 1.95 inches Height: 1.43 inches…

1 Ring-3/8′ Dovetail-Medium $8.99 (2) 1″ Dovetail rings Aluminum construction Weight: 1.5 oz. Overall Height: 1.65 in. Height: 1.06 in….

UAG Mosin Nagant 2-7×32 Long Eye Relief Scope + New Generation Weaver Rail Mount + Scope Rings+ Lens Covers+Lens Cleaning Kit $49.90 Official UAG Mosin Nagant 2-7×32 Long Eye relief scope and mount package. Includes the 2-7×32 Duplex Reticle Long Eye Relief scope, Mosin Nagant Weaver Mount, mounting hardware, rings, lens cleaning kit, and lens covers. The scope is Nitrogen filled, fogproof, shock proof to withstand and perfrom under the highest recoil, and water resistant. Features a duplex reticle for sharper aiming points and…

Sniper: Art of Victory $0.01 WW II was a theatre of war for many specialized co…

Sniper: Art of Victory $5.38 WW II was a theatre of war for many specialized combat units, working together to ensure an army’s victory. Among them a unique role was played by hidden and deadly marksmen. Their ability to lay motionless waiting for the perfect shot together with their professional equipment allowed them to change the course of the history with one pull of a trigger. Become a sharpshooter and take part in …

PPS submachine gun – Hydraulic Couplings – Precision Fasteners manufacturer

History
The PPS was created in response to a Red Army requirement for a compact and lightweight weapon that would provide similar accuracy and firepower (with a reduced rate of fire) while utilizing more cost-effective means of production than the Soviet PPSh-41 submachine gun being widely deployed at the time. During the design phase, emphasis was placed on simplifying the production process and eliminating most machining operations; sheet-steel stamping was selected to make most of the weapon’s parts. These cost-saving measures reduced the amount of machined components to a bare minimum, cutting down machining time by more than half (2.7 hours of machining required to complete a PPS as opposed to 7.3 hours for the PPSh-41). Savings of over 50% were also noted in terms of raw steel usage (6.2 kg instead of 13.9 kg) and the number of workers required to fabricate the individual components and conduct final assembly of the weapon.
Prototypes were evaluated successfully during the spring of 1942, after which the firearm was accepted into service later that year as the PPS-42 (Russian: – or Pistolet Pulemyot Sudayeva model of 1942). The weapon was thrust into small-scale production during the Siege of Leningrad, however mass production did not commence until early 1943 at the Sestroryetsk Arsenal (over 45,000 weapons were produced before being replaced by the improved PPS-43). The improvements to production efficiency allowed the Soviets to increase monthly submachine gun output from 135,000 units to 350,000 weapons. Design details Operating mechanism
The PPS was an automatic blowback-operated weapon that fired from an open bolt. The bolt was cylindrical in shape and contained a spring-loaded claw extractor, which pulled the empty case out of the chamber and passed it to the fixed ejector housed in the lower receiver. The charging handle was integral to the bolt and was located on the right side; it would reciprocate during firing. The PPS originally had a fixed but replaceable firing pin, held in place by the extractor spring. Pulling the trigger released the bolt, which moved forward, stripping a round from the magazine, chambering it and striking the primer in one motion. Features
The PPS had a trigger mechanism that allowed only fully automatic fire and a manual safety that secured the against accidental discharges. When in the “safe” position (engaged by sliding a metal bar forward of the trigger guard), both the bolt and trigger were disabled. The weapon was fed from curved 35-round box magazines that did not interchange with magazines used in the PPSh-41; nor could the gun use drum magazines. It was chambered for the 7.62×25mm Tokarev M1930 pistol cartridge.
The submachine gun’s rifled barrel (with 4 right-hand grooves) was mounted in a perforated sheet metal heat guard and was equipped with a crude muzzle brake, consisting of a strip of steel bent into a U-shape that deflected exiting muzzle gases to the sides and backwards, thus compensating for recoil.
A folding stock was attached to the receiver with a spring-loaded catch button on the left side. The stock folded up and over the receiver top cover and the weapon could be fired in this arrangement. The submachine gun also had a pistol grip but was not provided with a forward grip as the magazine well was intended to fulfill this role. The PPS was usually supplied with two magazine pouches, an oil bottle, bore brush and sling. Sights
The PPS was fitted with a set of open-type iron sights consisting of a fixed front post protected from impact by two sheet metal plates and a flip rear sight with two pivoting notches, for firing at 100 and 200 m. Variants
A Chinese-made Type 54 variant.
Towards the middle of 1943 the modernized PPS-43 entered production; efforts were made to improve manufacturing and safety. The ventilated heat shield was integrated with the upper receiver cover, both the barrel and shoulder stock were shortened, the stock’s locking mechanism was simplified, the casing ejector was moved to the rear of the recoil spring guide rod, the magazine well angle was increased in the receiver in order to enhance feeding reliability and the safety was improved to block the trigger and lock the bolt in either the open or closed positions.
Outside of the Soviet Union, the PPS was license-produced in Poland (from 1948) and the People’s Republic of China (Type 54). Several variants were made based on the PPS-43, including a training version built in Poland, chambered for the .22 Long Rifle rimfire cartridge (fed using standard PPS-43 magazines but modified with an aluminum reduction insert) and the Finnish M/44 submachine gun. The M/44 was a modified copy with minor differences to the original PPS-43. It fired the 9×19mm Parabellum pistol round and accepted box magazines from the Carl Gustav SMG) or drum magazines from the Suomi M/31.
In the early 1950s Poland developed a modified version of the PPS-43, known as the PPS wz. 1943/1952 that replaced the folding metal stock with a fixed wooden buttstock. This was mounted to the receiver end plate using two inserts and the receiver take-down hook was bent downwards to accommodate the change. The buttstock has a compartment carved inside of it that contains a standard cleaning kit; the side of the butt has a sling loop. This modification was meant to increase the accuracy of the PPS submachine gun, but minimal gains in accuracy were offset by the increase in weight and size of the PPS wz. 43/52 in comparison to the original PPS-43. Between 19521955, the ucznik Arms Factory in Radom built approximately 111,000 PPS submachine guns.
In 1953, the West German border guards (Bundesgrenzschutz) adopted the Spanish-made DUX-53 and DUX-59 submachine guns, copied from the PPS-43 by way of the Finnish M/44. The Vietnamese K-50M also borrowed elements from the PPS design, while in the 1950s, Hungary combined basic features of the PPS-43 with the bolt safety of the PPSh-41 in the unsuccessful M53. Users
 Cambodia
 China: Made unlicensed copies under the designation Type 54.
 Finland
 North Korea
 Poland: First acquired in 1943 and used on the Eastern Front by the Polish Peoples Army. In 1946 production of the submachine gun was undertaken at the H. Cegielski factory in Pozna. Later, production was extended to the ucznik Arms Factory and Wifama manufacturing conglomerate and would continue until 1970. The weapon remained in service with the armed forces and police units until 1980, when it was replaced by the AKM assault rifle.
 Soviet Union
 Ukraine
 Vietnam See also
List of Russian weaponry References
^ a b c d e f g h i j k l m n Woniak, Ryszard: Encyklopedia najnowszej broni palnejom 3 M-P, page 272. Bellona, 2001.
^ Woniak, 273 Bibliography
Ezell, Edward Clinton (1986). The AK47 Story: Evolution of the Kalashnikov Weapons. Harrisburg, PA: Stackpole Books. ISBN 978-0811709163. 
(Polish) Woniak, Ryszard (2001). Encyklopedia najnowszej broni palnejom 3 M-P. Warsaw, Poland: Bellona. ISBN 83-11-09149-8.  External links
Modern Firearms
v  d  e
Soviet infantry weapons of World War II
Side-arms
TT pistol Nagant M1895
Rifles & carbines
AVS-36 SVT-40 Mosin-Nagant
Submachine guns
PPD-40 PPSh-41 PPS
Grenades
F1 RGD-33 RG-41 RG-42 M1914/30 RPG-40 RPG-43 RPG-6
Machine guns & other larger weapons
M1910 Maxim DS-39 DP SG-43 Goryunov DShK PTRD PTRS ROKS-2/ROKS-3
Cartridges used by the USSR during WWII
7.62×25mm Tokarev 7.62×38mmR 7.62×54mmR 12.7×108mm 14.5×114mm Categories: 7.62 mm firearms | Cold War infantry weapons | Submachine guns | World War II Soviet infantry weapons | World War II submachine guns
About the Author

We are high quality suppliers, our products such as Hydraulic Couplings , Precision Fasteners manufacturer for oversee buyer. To know more, please visits china machining parts.

Is there any Dragunov style Stock available for Mosin Nagant 91/30? Can other rifle stocks like SKS fit Mosin?

There are Dragunov style stocks available for AKs and SKS ? Can they fit with little modifications to Mosin Nagant 91/30 ?

First of all, don’t listen to “Mr. Bitter Clinger”. The Mosin Nagant 91/30 is a great rifle, and in good hands it’s just as good as any Mauser 98 or 1903 Springfield so forget his little rant.
Unfortunately however, as far as I know they’re is not any Dragunov style stocks for the Mosin Nagant. Likewise I highly doubt it’s possible to modify an SKS stock to fit a Mosin, and I can almost guarantee it would be impossible to us an AK47 stock on a Nagant. Sorry.
Hope that helps.

Mosin Nagant